Product Ref.
Internal Dia. Inches
Internal Dia. mm
External Dia mm
Wall Thickness Overall mm
Weight kg/m
Min Bend Radius
Vacuum m of H2O
Working Pressure Bar
Coil Length Metres
Quantity
Product Ref.SFXEBOR04
Internal Dia. Inches⅜"
Internal Dia. mm10
External Dia mm19.0
Wall Thickness Overall mm4.5
Weight kg/m0.4
Min Bend Radius20
Vacuum m of H2O9
Working Pressure Bar24
Coil Length Metres30/50
Product Ref.SFXEBOR05
Internal Dia. Inches½
Internal Dia. mm13
External Dia mm22.0
Wall Thickness Overall mm4.5
Weight kg/m0.5
Min Bend Radius25
Vacuum m of H2O9
Working Pressure Bar24
Coil Length Metres30/50
Product Ref.SFXEBOR06
Internal Dia. Inches⅝
Internal Dia. mm16
External Dia mm25.0
Wall Thickness Overall mm4.5
Weight kg/m0.6
Min Bend Radius30
Vacuum m of H2O9
Working Pressure Bar20
Coil Length Metres30/50
Product Ref.SFXEBOR07
Internal Dia. Inches¾”
Internal Dia. mm19
External Dia mm28.0
Wall Thickness Overall mm4.5
Weight kg/m0.7
Min Bend Radius35
Vacuum m of H2O9
Working Pressure Bar16
Coil Length Metres30/50
Product Ref.SFXEBOR10
Internal Dia. Inches1”
Internal Dia. mm25
External Dia mm36.9
Wall Thickness Overall mm6.0
Weight kg/m1.2
Min Bend Radius50
Vacuum m of H2O9
Working Pressure Bar15
Coil Length Metres30/50
Product Ref.SFXEBOR12
Internal Dia. Inches1 ¼"
Internal Dia. mm32
External Dia mm43.0
Wall Thickness Overall mm5.5
Weight kg/m1.4
Min Bend Radius65
Vacuum m of H2O9
Working Pressure Bar13.3
Coil Length Metres30/50
Product Ref.SFXEBORM35
Internal Dia. InchesMetric
Internal Dia. mm35
External Dia mm46.8
Wall Thickness Overall mm5.9
Weight kg/m1.6
Min Bend Radius75
Vacuum m of H2O9
Working Pressure Bar11.6
Coil Length Metres30/50
Product Ref.SFXEBOR15
Internal Dia. Inches1 ½"
Internal Dia. mm38
External Dia mm50.0
Wall Thickness Overall mm6.0
Weight kg/m1.8
Min Bend Radius80
Vacuum m of H2O9
Working Pressure Bar11.6
Coil Length Metres30/50
Product Ref.SFXEBORM45
Internal Dia. InchesMetric
Internal Dia. mm45
External Dia mm58.0
Wall Thickness Overall mm6.5
Weight kg/m2.4
Min Bend Radius95
Vacuum m of H2O9
Working Pressure Bar10
Coil Length Metres30/50
Product Ref.SFXEBOR20
Internal Dia. Inches2"
Internal Dia. mm51
External Dia mm65
Wall Thickness Overall mm7.0
Weight kg/m2.8
Min Bend Radius105
Vacuum m of H2O9
Working Pressure Bar10
Coil Length Metres30/50
(i) Maximum working pressure is based on a factor of safety of 3:1 on short term burst pressure at 20°C. If the temperature increases, please refer to the temperature pressure charts.
(ii) Lengths detailed above are as standard, however variations may be available subject to minimum order quantities. Weights are approximate dependent upon working tolerance and density of materials.
(iii) Bending diameter information is intended as a guide to the minimum bend radius at 20°C ambient temperature without restricting the bore. It does not mean that the hose cannot be bent below the given dimensions but restriction is likely to occur.
