Product Ref.
Internal Dia. Inches
Internal Dia. mm
External Dia mm
Wall Thickness Overall mm
Weight kg/m
Min Bend Radius
Vacuum m of H2O
Working Pressure Bar
Coil Length Metres
Quantity
Product Ref.MTH20
Internal Dia. Inches2"
Internal Dia. mm51.0
External Dia mm63.2
Wall Thickness Overall mm6.1
Weight kg/m1.36
Min Bend Radius230
Vacuum m of H2O9
Working Pressure Bar5.5
Coil Length Metres30 / 50
Product Ref.MTH25
Internal Dia. Inches2 1/2"
Internal Dia. mm63.0
External Dia mm76.8
Wall Thickness Overall mm6.9
Weight kg/m1.91
Min Bend Radius330
Vacuum m of H2O9
Working Pressure Bar4.5
Coil Length Metres30 / 50
(i) Maximum working pressure is based on a factor of safety of 3:1 on short term burst pressure at 20°C. If the temperature increases, please refer to the temperature pressure charts.
(ii) Lengths detailed above are as standard, however variations may be available subject to minimum order quantities. Weights are approximate dependent upon working tolerance and
density of materials.
(iii) Bending diameter information is intended as a guide to the minimum bend radius at 20°C ambient temperature without restricting the bore. It does not mean that the hose cannot be
bent below the given dimensions but restriction is likely to occur.
