Product Ref.
Internal Dia. Inches
Internal Dia. mm
External Dia mm
Wall Thickness Overall mm
Weight kg/m
Min Bend Radius
Vacuum m of H2O
Working Pressure Bar
Coil Length Metres
Quantity
Product Ref.CUXEOR07
Internal Dia. Inches¾”
Internal Dia. mm19.0
External Dia mm26.6
Wall Thickness Overall mm3.8
Weight kg/m0.32
Min Bend Radius85
Vacuum m of H2O9
Working Pressure Bar9.3
Coil Length Metres30 / 50
Product Ref.CUXEOR10
Internal Dia. Inches1”
Internal Dia. mm25.4
External Dia mm33.8
Wall Thickness Overall mm4.2
Weight kg/m0.49
Min Bend Radius100
Vacuum m of H2O9
Working Pressure Bar9.3
Coil Length Metres30 / 50
Product Ref.CUXEOR20
Internal Dia. Inches2”
Internal Dia. mm51.6
External Dia mm62.0
Wall Thickness Overall mm5.2
Weight kg/m1.04
Min Bend Radius200
Vacuum m of H2O9
Working Pressure Bar7.3
Coil Length Metres30 / 50
Product Ref.CUXEOR30
Internal Dia. Inches3”
Internal Dia. mm76.0
External Dia mm89.0
Wall Thickness Overall mm6.5
Weight kg/m1.70
Min Bend Radius300
Vacuum m of H2O9
Working Pressure Bar6
Coil Length Metres30 / 50
Product Ref.CUXEOR40
Internal Dia. Inches4”
Internal Dia. mm102.0
External Dia mm116.8
Wall Thickness Overall mm7.4
Weight kg/m2.62
Min Bend Radius400
Vacuum m of H2O9
Working Pressure Bar4.7
Coil Length Metres30
Product Ref.CUXEOR50
Internal Dia. Inches5”
Internal Dia. mm127.0
External Dia mm142.2
Wall Thickness Overall mm7.6
Weight kg/m3.49
Min Bend Radius510
Vacuum m of H2O9
Working Pressure Bar4
Coil Length Metres30
Product Ref.CUXEOR60
Internal Dia. Inches6”
Internal Dia. mm152.0
External Dia mm167.6
Wall Thickness Overall mm7.8
Weight kg/m4.43
Min Bend Radius610
Vacuum m of H2O9
Working Pressure Bar3.3
Coil Length Metres30
(i) Maximum working pressure is based on a factor of safety of 3:1 on short term burst pressure at 20°C. If the temperature increases, please refer to the temperature pressure charts.
(ii) Lengths detailed above are as standard, however variations may be available subject to minimum order quantities. Weights are approximate dependent upon working tolerance and
density of materials.
(iii) Bending diameter information is intended as a guide to the minimum bend radius at 20°C ambient temperature without restricting the bore. It does not mean that the hose cannot be bent below the given dimensions but restriction is likely to occur.
