Product Ref.
Internal Dia. Inches
Internal Dia. mm
External Dia mm
Wall Thickness Overall mm
Weight kg/m
Min Bend Radius
Vacuum m of H2O
Working Pressure Bar
Coil Length Metres
Quantity
Product Ref.CSSXT40
Internal Dia. Inches4”
Internal Dia. mm102
External Dia mm118.0
Wall Thickness Overall mm8.0
Weight kg/m3.95
Min Bend Radius360
Vacuum m of H2O9
Working Pressure Bar4.3
Coil Length Metres30
Product Ref.CSSXT50
Internal Dia. Inches5”
Internal Dia. mm127
External Dia mm144.2
Wall Thickness Overall mm8.6
Weight kg/m5.25
Min Bend Radius490
Vacuum m of H2O9
Working Pressure Bar4.0
Coil Length Metres30
Product Ref.CSSXT60
Internal Dia. Inches6”
Internal Dia. mm152
External Dia mm172.4
Wall Thickness Overall mm10.2
Weight kg/m7.45
Min Bend Radius580
Vacuum m of H2O9
Working Pressure Bar3.7
Coil Length Metres30
Product Ref.CSSXT80
Internal Dia. Inches8”
Internal Dia. mm204
External Dia mm227.0
Wall Thickness Overall mm11.5
Weight kg/m11.75
Min Bend Radius760
Vacuum m of H2O9
Working Pressure Bar3.3
Coil Length Metres10
Product Ref.CSSXT100
Internal Dia. Inches10”
Internal Dia. mm254
External Dia mm282.0
Wall Thickness Overall mm14.0
Weight kg/m16.6
Min Bend Radius1120
Vacuum m of H2O9
Working Pressure Bar3.0
Coil Length Metres10
Product Ref.CSSXT120
Internal Dia. Inches12"
Internal Dia. mm304
External Dia mm342.0
Wall Thickness Overall mm19.0
Weight kg/m19.5
Min Bend Radius1440
Vacuum m of H2O9
Working Pressure Bar1.5
Coil Length Metres10
(i) Maximum working pressure is based on a factor of safety of 3:1 on short term burst pressure at 20°C. If the temperature increases, please refer to the temperature pressure charts.
(ii) Lengths detailed above are as standard, however variations may be available subject to minimum order quantities. Weights are approximate dependent upon working tolerance and density of materials.
(iii) Bending diameter information is intended as a guide to the minimum bend radius at 20°C ambient temperature without restricting the bore. It does not mean that the hose cannot be bent below the given dimensions but restriction is likely to occur.
