Product Ref.
Internal Dia. Inches
Internal Dia. mm
External Dia mm
Wall Thickness Overall mm
Weight kg/m
Min Bend Radius
Vacuum m of H2O
Working Pressure Bar
Coil Length Metres
Quantity
Product Ref.CMP6/12
Internal Dia. Inches¼"
Internal Dia. mm6
External Dia mm12.0
Wall Thickness Overall mm3.0
Weight kg/m0.12
Min Bend Radius60
Vacuum m of H2O-
Working Pressure Bar20
Coil Length Metres30
Product Ref.CMP8/15
Internal Dia. Inches5∕16"
Internal Dia. mm8
External Dia mm15.0
Wall Thickness Overall mm3.5
Weight kg/m0.18
Min Bend Radius75
Vacuum m of H2O-
Working Pressure Bar20
Coil Length Metres30
Product Ref.CMP10/17
Internal Dia. Inches⅜"
Internal Dia. mm10
External Dia mm17.0
Wall Thickness Overall mm3.5
Weight kg/m0.22
Min Bend Radius85
Vacuum m of H2O-
Working Pressure Bar20
Coil Length Metres30
Product Ref.CMP12.5/19
Internal Dia. Inches½"
Internal Dia. mm12.5
External Dia mm19.0
Wall Thickness Overall mm3.3
Weight kg/m0.24
Min Bend Radius95
Vacuum m of H2O-
Working Pressure Bar20
Coil Length Metres30
Product Ref.CMP19/29
Internal Dia. Inches¾"
Internal Dia. mm19
External Dia mm29.0
Wall Thickness Overall mm5.0
Weight kg/m0.58
Min Bend Radius145
Vacuum m of H2O-
Working Pressure Bar20
Coil Length Metres30
Product Ref.CMP25/36
Internal Dia. Inches1"
Internal Dia. mm25
External Dia mm36.0
Wall Thickness Overall mm5.5
Weight kg/m0.80
Min Bend Radius180
Vacuum m of H2O-
Working Pressure Bar20
Coil Length Metres30
(i) Maximum working pressure is based on a factor of safety of 4:1 for air and 3:1 for water on short term burst pressure at 20°C. If the temperature increases, please refer to the
temperature pressure charts.
(ii) Lengths detailed above are as standard, however variations may be available subject to minimum order quantities. Weights are approximate dependent upon working tolerance and
density of materials.
(iii) Bending diameter information is intended as a guide to the minimum bend radius at 20°C ambient temperature without restricting the bore. It does not mean that the hose cannot be
bent below the given dimensions but restriction is likely to occur.
