Product Ref.
Internal Dia. Inches
Internal Dia. mm
External Dia mm
Wall Thickness Overall mm
Weight kg/m
Min Bend Radius
Vacuum m of H2O
Working Pressure Bar
Coil Length Metres
Quantity
Product Ref.ASH30BLU
Internal Dia. Inches¼"
Internal Dia. mm6.3
External Dia mm12.5
Wall Thickness Overall mm3.1
Weight kg/m0.12
Min Bend Radius44
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
Product Ref.ASH40BLU
Internal Dia. Inches5∕16"
Internal Dia. mm8
External Dia mm14.5
Wall Thickness Overall mm3.25
Weight kg/m0.15
Min Bend Radius56
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
Product Ref.ASHM9BLU
Internal Dia. InchesMetric
Internal Dia. mm9
External Dia mm16.0
Wall Thickness Overall mm3.5
Weight kg/m0.18
Min Bend Radius63
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
Product Ref.ASH45BLU
Internal Dia. Inches⅜"
Internal Dia. mm10
External Dia mm17.0
Wall Thickness Overall mm3.5
Weight kg/m0.19
Min Bend Radius70
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
Product Ref.ASHM12BLU
Internal Dia. InchesMetric
Internal Dia. mm12
External Dia mm20.0
Wall Thickness Overall mm4.0
Weight kg/m0.26
Min Bend Radius84
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
Product Ref.ASH50BLU
Internal Dia. Inches½"
Internal Dia. mm12.5
External Dia mm20.5
Wall Thickness Overall mm4
Weight kg/m0.30
Min Bend Radius95
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
Product Ref.ASH70BLU
Internal Dia. Inches⅝"
Internal Dia. mm16
External Dia mm24.0
Wall Thickness Overall mm4.0
Weight kg/m0.33
Min Bend Radius112
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
Product Ref.ASH80BLU
Internal Dia. Inches¾"
Internal Dia. mm19
External Dia mm28.0
Wall Thickness Overall mm4.5
Weight kg/m0.44
Min Bend Radius145
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
Product Ref.ASH90BLU
Internal Dia. Inches1"
Internal Dia. mm25
External Dia mm35.0
Wall Thickness Overall mm5.0
Weight kg/m0.62
Min Bend Radius210
Vacuum m of H2O-
Working Pressure Bar40
Coil Length Metres25 / 50 / 100
(i) Maximum working pressure is based on a factor of safety of 3:1 on short term burst pressure at 20°C. If the temperature increases, please refer to the temperature pressure charts.
(ii) Lengths detailed above are as standard, however variations may be available subject to minimum order quantities. Weights are approximate dependent upon working tolerance and
density of materials.
(iii) Bending diameter information is intended as a guide to the minimum bend radius at 20°C ambient temperature without restricting the bore. It does not mean that the hose cannot be
bent below the given dimensions but restriction is likely to occur.
